|
For a
project update, call 212-461-8738 Keep checking back as that message will
be updated from time to time. |
|
Negawat& Tesla Coil Demo
|
Surfaces
– Miracle Shield can be used on the following
surfaces. NOTE: Outdoor applications should
be a minimum of two coats solution. Finish
–Miracle Shield,
will dry to a satin or low-luster semi-gloss finish. Which is scratch resistant.
There is no buffing required. Application
- Miracle
Shield can be applied as follows: Miracle Shield hardens best at a
surface temperature of 55 degrees or higher on an average of 15 - 20 minutes. Surface
Preparation - In order for Miracle Shield to work properly,
the surface must be free from any dust, dirt grease, grime or wax. You can
remove any oil, wax or grease with household rubbing alcohol. Cleaning
Properties –Miracle Shield has no known cleaning properties such as
some other multi-purpose sealants. However, some applications have shown that
mild mars, rust and stains have been removed when applied. Viscosity
- The thickness of Miracle Shield is determined by it’s
application. The standard application id either by brush, spraying or rolling.
With standard applications, about 2 mil. of product is realized per coat. Product
Indications / Preparation
– Miracle Shield comes already mixed and ready for use right out of the
container. There is no mixing or dilution necessary. Restrictions
– Miracle Shield is not to be used on glass, mirrors, chrome or
brass. Hazards
– Miracle Shield is a mixture of 55% water and 45% chemical
solvent. Product Highlights Protects
Against Guarantee
– Miracle Shield is guaranteed not to chip, crack, peel or yellow. Sold
– Miracle Shield is available in 5 gal containers or 55 gal drums. |
|
|
Go to our Home page Click here for the
Plan for Free Electricity
|